After buying your Husqvarna chainsaw it is important that you take proper care of it. If you don't then it could end up costing you quite a lot to get new Husqvarna chainsaw parts to replace those that are damaged. So before each use of your equipment you should thoroughly check it over to make sure that all parts are in good working order.
Below we offer some advice on what you should be looking for when inspecting your Husqvarna chainsaw prior to use. This way not only will you ensure that your equipment remains working at its most efficient levels, but will ensure that the costs to repair it are kept low.
First off inspect the teeth on the saw blade first to make sure that none of these have been damaged or broken. If you don't then as soon as you start to cut into any wood you will find it very difficult indeed.
Secondly, next take a close look at the chain and sprocket which are driving the blade. Again it is important that you check this to ensure that the right level of tension is in the chain. If it isn't then the chances of it coming off are greatly increased. Plus again it won't work as effectively as cutting through the wood as you would have hoped.
Thirdly, before you start the chainsaw up inspect the motor very carefully. Look for any lose screws or fasteners on it. Plus also look to see if there is any dust or debris collecting in areas where it shouldn't. Failure to remove this can lead to it getting into the motor and then causing it to stop working as a part has broken or the motor has seized.
No comments:
Post a Comment